Kerlink Wirnet iBTS 64
- LoRa FPGA v58
- OS 3.1.16
FPGA version can be identified in /tmp/board_info.json fpga_swver field.
Senet Packet Forwarder for RAN Providers
Before installing verify you have properly configured your network settings on the gateway. The installation process will apply security measures which include modifications to the firewall as well as the password; the installer may also configure the system and install new packages. Access to the gateway over the local network through such protocols as SSH and telnet will no longer be available upon completion of the installer.
If you have not done so already you will need to register your gateway through your Developer or RAN Provider account.
The serial number for this device is the last 9 digits of the CPU Identification Code which can be found on the shipping box or on the CPU unit itself.
SSH to the Kerlink Kerlink Wirnet iBTS 64 and change your working directory to tmp.
Copy and paste the following command into the Kerlink Kerlink Wirnet iBTS 64 SSH console.
Run the command. The installation is automatic and will prompt you once it has completed.
Once registration and Base Station software installation are complete the Base Station will be displayed in the Senet Portal Dashboard with the current registration status (this may require a refresh of the browser).