Kerlink Wirnet Station

System Requirements

Senet Packet Forwarder for RAN Providers

Note

Before installing verify you have properly configured your network settings on the gateway. The installation process will apply security measures which include modifications to the firewall as well as the password; the installer may also configure the system and install new packages. Access to the gateway over the local network through such protocols as SSH and telnet will no longer be available upon completion of the installer.

Registration

If you have not done so already you will need to register your gateway through your Developer or RAN Provider account.

Note

The serial number for this device is "0x" followed the 7 digit alphanumeric identifier located inside the device or on the shipping box.

Installation

Copy and paste the following command into the Kerlink Kerlink Wirnet Station SSH console.

OS Version Command
OS 2.x
dlF=lgwInstaller_02_10_12.sh;dlC=senetco;wget --no-check-certificate http://docs.${dlC}.io/downloads/02_10_12/$dlF -O $dlF && chmod +x $dlF && ./${dlF} -c ${dlC}

Run the command. The installation is automatic and will prompt you once it has completed.

reboot

Once registration and Gateway software installation are complete the Gateway will be displayed in the Senet Portal Dashboard with the current registration status (this may require a refresh of the browser).