Gemtek Indoor Femto

Senet Packet Forwarder for Developers

Registration

If you have not done so already you will need to register your gateway through your Developer or RAN Provider account.

Note

The Gemtek serial number is a 15 digit alphanumeric identifier located on the bottom the Gateway.

Installation

Before installation, verify the Gateway has not been provisioned to be a Semtech packet forwarder. If the Semtech packet forwarder has already been provisioned it will need to be disabled.

Copy and paste the following command into the Gemtek SSH console.

FW Version Command
3.00.04
dlF=lgwInstaller.sh;dlC=senetco;wget --no-check-certificate http://docs.${dlC}.io/downloads/$dlF -O $dlF && chmod +x $dlF && ./${dlF} -c ${dlC}

Run the command. The installation is automatic and will prompt you once it has completed.

Once registration and Gateway software installation are complete the Gateway will be displayed in the Senet Portal Dashboard with the current registration status (this may require a refresh of the browser).