Kerlink Wirnet iBTS Compact

System Requirements

Note

FPGA version can be identified in /tmp/board_info.json fpga_swver field.

Senet Packet Forwarder for RAN Providers

Note

Before installing verify you have properly configured your network settings on the gateway. The installation process will apply security measures which include modifications to the firewall as well as the password; the installer may also configure the system and install new packages. Access to the gateway over the local network through such protocols as SSH and telnet will no longer be available upon completion of the installer.

Registration

If you have not done so already, follow the directions here to register your gateway.

Note

The serial number for this device is the last 9 digits of the CPU Identification Code which can be found on the shipping box or on the CPU unit itself.

Installation

SSH to the Kerlink Kerlink Wirnet iBTS Compact and change your working directory to tmp.

cd /tmp

Copy and paste the following command into the Kerlink Kerlink Wirnet iBTS Compact SSH console.

dlF=lgwInstaller.sh;dlC=senetco;wget --no-check-certificate http://docs.${dlC}.io/downloads/$dlF -O $dlF && chmod +x $dlF && ./${dlF} -c ${dlC}

Run the command. The installation is automatic and will prompt you once it has completed.

reboot

Once registration and gateway software installation are complete the gateway will be displayed in the Senet Portal Dashboard with the current registration status (this may require a refresh of the browser).